Relay Output Board
- 24 SPDT, Form C Relays (DPDT optional)
- Fully compatible with any ACCES digital I/O card (except for IOD-64)
- 3A carry-current contact ratings on ROB-24 and 4A on ROB-24H
- Screw terminals for #14 through #22 AWG wire
LED status indicators for each relay
- Designed, made, supported, and manufactured in the USA
NOW AVAILABLE WITH REMOVABLE SCREW TERMINALS
Contact us with questions or for pricing on this option.
For remote (RS-485) control of relays, you can also connect a modified ROB-24 to our RDG-24.
Each relay provides normally-closed and normally-open contacts (SPDT). If you need dual Form C contacts (DPDT), you may specify ROB-24-2 or ROB-24H-2.
I/O connectors for 50-pin connections (from ACCES' IOD-Series cards) and 37-pin connectors are provided. The latter provide means to use these relay cards with other manufacturer's cards if they use 37-pin connections. Interconnection to the digital output card can be via ACCES' model CAB50F-xx ribbon cable to ACCES' I/O cards or via CAB37-xx ribbon cable to other I/O cards. The relays are actuated by a 5-volt logic signal applied to appropriate pins of either the 50-pin or the 37-pin connector. If the digital-output card to be used has an unbuffered output (e.g., direct output from a type 8255 Programmable Peripheral Interface chip), then specify ROB-24-3 or ROB-24H-3. (Note: When Option 3 is selected, the relays will be actuated when power is applied to the card.) Thus, by use of ROB-24 or ROB-24H, you can realize simple, inexpensive control of heaters, fans, lights, etc.
The ROB-24 may be interfaced to any port of any ACCES IOD-Series card. Normally, digital inputs are pulled down to ground through 680 ohm resistors. However, if you prefer that they be pulled up to +5VDC, you can specify ROB-24-5 or ROB-24H-5. You can have multiple options in the card. For example, if you need AC-powered capability, DPDT relay output connections, and signals will come from an unbuffered digital output card, then the model number becomes: ROB-24-1-2-3
10 OUT &H313,& amp;H80
- 'Sets the ports to use as outputs
- 'Activates port A, bit 0 (relay 0)
- 'Activates port B, bit 4 (relay 21)
Drivers and Downloads
ACCES also offers Custom Software Services for our products. Our prices are unbelievably low, often as inexpensive as free! If you need something tweaked to support your needs, or an entire enterprise application developed from scratch, it is definitely worth your time to inquire with us, first.
Further information about available ACCES Software:
- Redistributing Windows Drivers
- A list of ACCES drivers and the files that compose them under different versions of Windows, so you can easily redistribute ACCES cards and drivers.
- Quantity and Type: 24 ea., SPDT, Form C. (DPDT optional.)
- Contact Material: Gold overlay silver.
- Max. Switched Current: 2A DC, 1.25A AC.
- Max. Carry Current: ROB-24: 2A AC or DC; ROB-24H: 4A AC or DC
- Max. Switched Voltage: 125 VDC or ACrms.
- Max. Switched Power: 30 VA on ROB-24, 360 VA on ROB-24H. (Note: Good safety practice should be followed if AC voltages are to be switched at the relays.)
- Actuate Time: ROB-24: 6 mSec; ROB-24H: 20mSec (including bounce).
- Release Time: ROB-24: 8 mSec (including bounce); ROB-24H: 10 mSec (including bounce).
- Mechanical Life Expectancy: 20 million operations minimum.
- Operating temperature Range: 0o to 50oC.
- Storage Temperature Range: -30o to +105oC.
- Humidity: 45 to 85% RH, non-condensing.
Power Consumption (all relays ON)
- 5 VDCPower: ROB-24: 2A, ROB-24H: 4A max.
- 115 VACPower: ROB-24: 310mA, ROB-24H: 390 mA max.
- Card Dimensions: 16" long x 4.75" wide x 2" high.
- Weight: 2.25 lbs. max. (for Model ROB-24-1-2).
- Screw Terminal Wire Spacing: 0.200" (5 mm).
- Screw Terminal Wire Sizes: 12 to 22 AWG.